Phone:(603) 578.9699 Fax: (603) 578.5585
This is our most popular dock style, great for water-depths of less than 10 feet, the pole driven dock utilizes 2″, .188″ wall aluminum poles with pole pads affixed to the bottoms.
Known for its perfect weight and stability, the modular pole driven dock system is also known as a stationary dock or pier dock and is a great choice for almost any waterfront. Our flush mounting splice kit makes for an easy connection between two adjoining dock sections. The built in corner brackets will accommodate our standard 2″ pole and leg pad assembly.
Leg Pad – Each 2” heavy walled pole has two pre-drilled holes on the bottom allowing the leg pad to be placed flush on the bottom (rocky environment) or at the higher position 8 inches up. With the leg pad at the higher position the leg will penetrate the ground dramatically increasing stability and keeping your dock level throughout the season.
Connection – Easily connect two dock sections with a standard or 90 degree splice kit. The all aluminum and stainless steel construction will give you the security you need even during inclement weather. If this doesn’t make building your dock easy enough in the winter the dock breaks back down into sections using just one allen key. Now you have any easy portable dock or port a dock.
Corner Bracket – Built in corner brackets allow for a flush internal pole design, out of the way of your boat or pwc. Each has comes standard with two inserts and two set screws. The inserts can be reversed to allow for effortless layout changes. Two cup point set screws allow you to securely set your dock at the desired height above water.
Track System – Put the drill away. FWM frames come with a track system on the side and bottom of the frame making the mounting of accessories a snap. Need to move a cleat or aluminum ladder from one position to another? No problem, loosen the screw, slide and re-tighten. It’s that easy.
Decking Panel – Each dock section comes with the decking installed in pre-panelized decking pieces (two or four). This allows you to dramatically reduce the weight of your dock by almost 50% in a matter of minutes making seasonal installation and removal a breeze.